- 3D PRINTERS
- 3D PRINTER ONDERDELEN
- Printen in 3D
CreatBot DE Plus
Nog niet gewaardeerd
- Niet op voorraad
- Voor de actuele levertijd kunt u contact op nemen met ons
CreatBot DE Plus
CreatBot DE Plus – Dual extruder 3D printer with large build volume and Bowden setup
CreatBot DE Plus is a solid constructed 3D printer with dual print heads, an enclosed building chamber with see through walls, a heated glass print bed and a Bowden style extruder. The extruder has the stepper motors positioned at the back of the machine which results in a light weight 3D print head assembly enabling high speed 3D printing. The CreatBot DE additive manufactures with PLA and ABS as well as other filaments including soluble HIPS and PVA. A great machine for engineering and education, stacking up multiple objects for production work, large architectural models, sculpture, jigs and fixtures.
Product highlights of CreatBot DE Plus:
- All metal chassis
- Smart adjustable extruder
- Automatically shutdown after work is done
- Multi-function keypad
- Gear motors feeder
- Ceramic panel hot bed
- Metal hot bed tray
- Large build volume of 400 x 300 x 520 mm
- High resolution up to 0.04 mm
- Filament detection system
- 3D Print in temperatures up to 400 ° C
- Simply continue 3D print in case of power loss
- All enclosed build space
All metal chassis
A 3D printer needs a firm weight to insure stable operation. Therefore, all metal chassis are the best way to go when it comes to 3D printing.
Smart adjustable extruder
CreatBot DE Plus extruders include an intelligent cooling system. This ensures that the filament is feeding at the optimal temperature all the time. The height adjustable nozzles allow you to align your two nozzles very quick and easy. Perfect when you want to 3D print with support, varied materials or just two colors. All CreatBots from 3D Prima come with dual extruders as standard.
Your CreatBot DE Plus is equipped with a power management module. When the 3D print is finished and there is no action taken within 5 minutes this 3D printer will shut down. Very useful and very energy efficient.
Multi-function key pad
CreatBot DE Plus has a multi-function keyboard. This makes for very easy handling and direct access to many of the most used functions, including Z shaft up/down, heating/cooling of hot bed, pause, resume 3D print, browse the SD card and more.
Gear motors feeder
A gear motor can produce more torque compared to the general stepper motor, this ensures that there is a smooth feeding of the filament always and that retraction is perfect.
Ceramic panel hot bed
On top of a silica heating plate there is a stunning ceramic hot bed which is more expensive then glass but also provides a better heating distribution and a more even heat. The ceramic plate is very smooth and provides a very good adhesion.
Metal hot bed tray
An all metal hot bed tray makes for a very stable 3D print platform which in turn improves stability.
Large build volume
The DE+ impresses with its massive build volume of 400 x 300 x 520 mm. That size is more than enough for most makers. This means that you can additive manufacture your creations in 52 cm height and with a resolution of 0.04 mm.
Filament detection system
If you should run out of filament during a 3D print, don't worry. The 3D printer will go into pause mode and let you change the filament - then you just hit resume, easy!
High temperature 3D prints
The nozzles can operate in temperatures up to 400 ° C. This means that you can use a wide range of different filaments. It also provides you with a very stable temperature during production.
Continuos 3D printing
If you should have an unexpected power loss the CreatBot DE Plus remembers the last known position, stores it, lowers and retracts the filament. When the power comes back on you can continue to 3D print.
All enclosed build space
On the CreatBot DE Plus you have a totally enclosed build space which prevents large 3D prints from being cracked or warped.
In the box
- CreatBot DE+ with dual extruders
- Packed in a wood crate
- 1 x SD card
- 1 x USB cable
- 1 x Power cable
- 1 x Tool kit
- 1 x Manual
- 2 x spools of 1 kg 3.00 mm filament
- Cura software on SD card
If you want a large volume dual extruder 3D printer with a bowden setup buy the CreatBot DE Plus.
|PRINTING TECHNOLOGY||FFF -Fused Filament Fabrication|
|EXTRUDERS||2 Dual Extruders|
|BUILD VOLUME||400 x 300 x 520 mm|
|LAYER RESOLUTION||0.05 mm|
|PRINT SPEED||Up to 120 mm/s|
|POSITION PRECISION||XYZ Axis 0.01 mm|
|LCD DISPLAY||Yes, with key board|
|OPERATING NOZZLE TEMPERATURE||MAX 400° C|
|PLATFORM TEMPERATURE||MAX 120 ° C|
|SUPPORTED MATERIALS||PLA, ABS, HIPS, PVA, PETG, Woodfill and others|
|FILAMENT DIAMETER||3.0 mm|
|CONNECTIONS||USB and SD card|
|SOFTWARE INCLUDED||CreatBot multi-language version|
|FILE FORMAT||STL, OBJ, GCode, Amf|
|NOZZLE DIAMETER||0.4 mm|
|SUPPORTED OS||Windows, Linux, Mac OS, OSX|
U kunt bij ons op de volgende manieren betalen: